Can I Use Two Cold Lasers at the Same Time on One Generator?

Published on October 18, 2019 by Spooky2 Videos

Most Affordable Rife Machine:
Global Rife Community:
Rife Machine Reviews:

Given that the cold laser is connected to Out 1 directly, and not via the boost (should not be using a boosted output), this leaves Out 2 open and unused. The cold laser requires a negative offset to function.

If Out 2’s output matches Out 1 (not inverse+sync), then of course you can connect a second laser to Out 2. Now, I will show you how to use two Cold Lasers at the same time on one generator.

Hardware Part
Here I use two Cold Laser Wrists as an example.
First, connect the power adapter to XM generator.
Then, connect XM generator to your computer.
Connect Spooky2 Cold Laser Wrist with the adapter cable.
Plug it directly into Out 1 port of Spooky2-XM generator.
Plug the second one directly into Out2 port of Spooky2-XM generator.
Turn on your generator.

Software Part
Launch the Spooky2 software.
Go to Presets tab, click /Shell(Empty) Presets /Spooky Cold Laser (L) – JW.
Go to Programs tab, choose programs you need. Here I choose “Bone Growth” and “Bone Pain and Inflammation” to help with my wrists.
Go to Settings tab. You can see that the preset Spooky Cold Laser (L) – JW already has Out 2 setup properly. The offset is -100 for both outputs, both are set to use square waves, each at 20v.
Go to Control tab, tick “Overwrite Generator” and choose your generator port.
Click “Start” to enjoy the frequencies.

By default both outputs get the same frequency. Using standard Out 2 modifiers, you can generate a different frequency on Out 2 if you wish.
You can modify Out 2 frequencies using the Out 2 = (Out 1 x #) + # – [] Hz line.
For example, if you input “2” and “50” (as shown in the video). The first frequency of Out 1 is 25 Hz, so the first frequency of Out 2 should be 100 Hz.
If you tick the option before “Hz”, the database frequency of Out 1 will be subtracted from Out 2. In this case, the first frequency of Out 2 is 75 Hz.
Also, the higher the frequency, the dimmer the laser output gets being rapidly turned on and off. We suggest that you use lower frequencies to perform frequency healing.

Thanks for watching this video. Do you have other questions about Spooky2 Cold Laser? Welcome to tell us!


Add your comment

Your email address will not be published.